Ingredients:

  • 250 grams Black Iron Oxide
  • 250 grams Ball Clay
  • 0 - 200 grams Flux material (e.g., Gerstley Borate or Nepheline Syenite)
  • 300 - 500 grams Water

Instructions:

  1. Prepare the work area by covering surfaces to prevent staining and gather all ingredients and equipment.
  2. Measure 250 grams of black iron oxide and 250 grams of ball clay. Start with 100 grams of flux material if unsure.
  3. Combine the black iron oxide, ball clay, and flux in a mixing bowl until homogenous, mixing thoroughly with a stirring stick.
  4. Gradually add 300-500 grams of water to achieve desired consistency, mixing continuously until smooth.
  5. Test the stains consistency; it should brush on easily but not be too runny.
  6. Transfer the mixed stain into an airtight container and label with the date.